Multipurpose LED EDM Machine DRO , EIA-422-A Signal Digital Readout Kits

SINO 3 Axis LED Digital Readout System DRO SDS6-3VE for EDM Fuction

SDS6-3VE DRO equips the matching output function that special for EDM machine.

It can connect the relay of the EDM to control the depth processing. 

SDS6 series DRO is allowed to input the high frequency of A/B signals up to 5MHz. It employs the newest 16 bits SCM technology, can substitute all kinds of basic function. So that’s an all-purpose DRO, the speed of measurement is faster, and the control system is easier and smoother. Each axis can supply 40 points of non-linear compensations to discrease the error. 

Strengthen Functions:

1. Calculator:

The DRO can change the decimal digits to be three, four or five digits to improve the calculating precision.

2. Non-linear error compensation:

The maximum 40 sections non-linear error compensation to improve the machining precision.

3. The numbers of decimal digits can be chosen in inch mode:

4 / 5 decimal digits can be chosen in inch mode. 4 digits can satisfy long scale requirement, and 5 digits can satisfy high precisions display.

4. Communication:

EDM matching output

Specifications :

Voltage: AC 80V~260V; 50Hz~60Hz, different plug is possible

Power consumption: 15VA

Operating temperature: 0~45 degrees centigrade

Storage temperature: -30~70 degrees centigrade

Readout allowable input signal: TTL/RS422 square wave

Allowable input signal frequency: Less than 5MHz

Max resolution of digital display length: 5µm (0.005mm/0.0002")

Min resolution of digital display angle :0.0001/pulse

Product image /photos:

Matching Output Interface: 

Size:

The rack in the picture is optioned, not standard product.