DRO SDS3MS SINO Digital Readout System TTL Lathe Milling Machine AC110V – 220V

Sino DRO SDS3MS Digital Readout TTL Lathe Milling Machine With AC110V–220V Input

The multipurpose gauge DRO SDS2MS has a numerical display with three coordinates.
Changes in the characteristics of this gauge allow it to be configured to perform the proper function with a different machine tool.

Digital readout settings for the SINO SDS3MS

1. The voltage range from AC to DC is 50 Hz to 60 Hz/85 v to 250 v.
2. The power consumed was 15 watts at 25 volts.

3. Create the three coordinates for the numbers: one, two, and three.
4. Use eight meters of words to demonstrate, and display symbols that signify seven displays (two or three axes) and generate data information.
5. A weight of two kg
6. The interface is user-friendly and features a programmable controller. The input signal is TTL, and the output signal is an EIA-422 open collector.
7. Permit a frequency of input signal greater than 100 KHz to connect a resolution: One micrometer, five microns, two microns, ten microns, and five microns

Digital display table advantages:

1, professional design, beautiful appearance generous, counts the frequency response is fast and powerful.
2, die-casting alloy shell, the surface electric pensu processing, dustproof wear-resisting, good shielding.
3, professional design, independent power supply, to adapt to the range, high stability, strong anti-jamming capability.
4, power supply and signal anti-interference ability, high quality and durable panel of buttons, change is simple and convenient.
5, directly on the digital display table for functional operation functions such as sine, cosine, tangent function, convenient processing.
6, can be in the X and Y direction for automatic tool compensation
7, RS - 232 - C interface can be connected to the PC and PLC is used in all kinds of automatic mechanism of displacement measurement.

Product image /photos:

The rack in the picture is optioned, not standard product.